| Updated |
Question |
| 1 |
2008-11-28 |
I used the Serial Port PCI Card drivers on my XP machine and it said they were not loaded correctly so the ports won＇t work?? |
| 2 |
2008-11-28 |
Does the Remap function select standart address for the all Parallel Port in Windows2000, XP, 2003? |
| 3 |
2008-11-28 |
Does SUNIX RS-232 card support the Vista32/64 system? |
| 4 |
2008-11-28 |
Does the address of 4037 can be changed under WINNT O.S ? |
| 5 |
2008-11-28 |
What＇t the meaning of Re-MAP on SUNIX website? What＇t the address of range? And what kind of O.S. does it support? How to set ? |
| 6 |
2008-11-28 |
Can SUNIX parallel PCI IO card change the IO address? |
| 7 |
2008-11-28 |
What does the A3V mean (at the end of products name)? |
| 8 |
2008-11-28 |
How to switch parallels＇ mode while using parallel card? |
| 9 |
2008-11-28 |
Why can＇t it communicate normally when I use CBP0020 to connect to the simulation machine? |
| 10 |
2008-11-28 |
Can SUNIX Parallel products support EPP/ECP mode as well as connect to the softdog device ? |
| 11 |
2008-11-28 |
Can the parallel port transferred from the UTP1025 to connect to the security box which using the parallel port to set? |
| 12 |
2008-11-28 |
When do you need the external power supply when you using SUNIX USB to Serial series? |
| 13 |
2008-11-28 |
What＇t the difference between PCMCIA I、PCMCIA II、PCMCIA III ? Which kind does SUNIX PCMCIA product belong to? |
| 14 |
2008-11-28 |
Why can＇t I use my Pen Drive by CardBus? |
| 15 |
2008-11-28 |
Why I can＇t use 2.5 inch mobile hardware with CardBus? |
| 16 |
2008-11-28 |
The driver won＇t work, and the screen always keeps on the beginning of installation, why |
| 17 |
2008-11-28 |
After installation, why some COM port show installation unfinished (at the end of the COM port name has a question mark) ? |
| 18 |
2008-11-28 |
How to modify the port number of SUNIX IO card? |
| 19 |
2008-11-28 |
How to install the driver of SUNIX add-on cards ? |
| 20 |
2008-11-28 |
How to adjust the FIFO setting when I use SUNIX add-on card? |
| Updated |
Question |
Count |
| 1 |
2007-04-24 |
What is the Matrix Card series Product pin assignment? |
0 |
| 2 |
2008-07-18 |
Why does the USB product display normally, but is unable to work? |
0 |
| 3 |
2008-11-03 |
Why my RS-232 card can not detect RS-232 mouse? |
0 |
| 4 |
2008-11-03 |
Why did the warning occur when I installed the driver of the RS-232 card? |
0 |
| 5 |
2008-11-28 |
I used the Serial Port PCI Card drivers on my XP machine and it said they were not loaded correctly so the ports won＇t work?? |
0 |
| 6 |
2008-11-28 |
Does the Remap function select standart address for the all Parallel Port in Windows2000, XP, 2003? |
0 |
| 7 |
2008-11-28 |
Does SUNIX RS-232 card support the Vista32/64 system? |
0 |
| 8 |
2008-11-28 |
Does the address of 4037 can be changed under WINNT O.S ? |
0 |
| 9 |
2008-11-28 |
What＇t the meaning of Re-MAP on SUNIX website? What＇t the address of range? And what kind of O.S. does it support? How to set ? |
0 |
| 10 |
2008-11-28 |
Can SUNIX parallel PCI IO card change the IO address? |
0 |
| 11 |
2008-11-28 |
What does the A3V mean (at the end of products name)? |
0 |
| 12 |
2008-11-28 |
How to switch parallels＇ mode while using parallel card? |
0 |
| 13 |
2008-11-28 |
Why can＇t it communicate normally when I use CBP0020 to connect to the simulation machine? |
0 |
| 14 |
2008-11-28 |
Can SUNIX Parallel products support EPP/ECP mode as well as connect to the softdog device ? |
0 |
| 15 |
2008-11-28 |
Can the parallel port transferred from the UTP1025 to connect to the security box which using the parallel port to set? |
0 |
| 16 |
2008-11-28 |
When do you need the external power supply when you using SUNIX USB to Serial series? |
0 |
| 17 |
2008-11-28 |
What＇t the difference between PCMCIA I、PCMCIA II、PCMCIA III ? Which kind does SUNIX PCMCIA product belong to? |
0 |
| 18 |
2008-11-28 |
Why can＇t I use my Pen Drive by CardBus? |
0 |
| 19 |
2008-11-28 |
Why I can＇t use 2.5 inch mobile hardware with CardBus? |
0 |
| 20 |
2008-11-28 |
The driver won＇t work, and the screen always keeps on the beginning of installation, why |
0 |
