ECS1S00

1-port High Speed RS-232 ExpressCard
  • Expands one RS-232 serial ports with communication speeds up to 921.6Kbps.
  • With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Full single-lane (or x1) PCI Express throughput.
  • Compliant with ExpressCard 34 and 54mm slot.
  • Built-in ±15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Hot-swapping feature allows you to connect/disconnect devices without powering down the system.
  • Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

SUNIX ECS1S00 was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional RS-232 serial port via a single slim-type 34/54mm ExpressCard slot. ECS1S00 equips SUNIX high performance and realizable chipset SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications. Users will benefit from ExpressCard plug-n-play ease of use, which eliminates the need to open the chassis to add new features. With SUNIX ECS1S00 RS-232 ExpressCard, you can connect serial peripherals such as GPS receivers, serial printers/plotters, barcode scanners, digital cameras, PDAs, Cell Phones and fax/modems.

Specifications

General

Interface RS-232
Controller SUNIX SUN2212 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 1-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 921.6Kbps
Data bit 5, 6, 7, 8
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Driver Support

Microsoft Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Microsoft Server 2000/2003/2008R2 / 2012 (X86/X64)
Microsoft Embedded Windows CE4.2/5.0/6.0 / XP Embedded / POS Ready 2009 /
Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS
FreeBSD FreeBSD 5.3~5.5 / 6.0~6.4
QNX QNX 6.3.2/6.4.0

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
Microsoft Client: XP / Vista / 7 / 8.x / 10 (X86/X64)
Microsoft Server: 2000 / 2003 / 2008 / 2012 (X86/X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

Iron Case 80(W) x 34(D) x 5(H) mm
Plastic Case 36(W) x 44(D) x 20(H) mm

Support

Download Datasheet

Download Driver

Driver WinCE 6.0 Driver V1.2.0.0
Version V1.2.0.0
Update 2013-09-11 15:40:33
Size 301.7KB
OS
Windows CE 6.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS
Driver SUN1999Driver V8.1.0.0 (WHQL) - 20130328.zip
Version Ver.8.1.0.0
Update 2013-06-10 18:04:07
Size 4.3MB
OS
Windows 8 32/64bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32/64 bit
Windows Server 2012 64bit
Windows Server 2003 32/64 bit
Windows Server 2008 R2 64bit
Windows Server 2008 32/64 bit
Windows Embedded Standard
Windows Embedded POSReady 2009
Driver WinCE 6.0_Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:52
Size 336KB
OS
Windows CE 6.0
Driver WinCE 5.0_Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0

ECS1S00

1-port High Speed RS-232 ExpressCard
  • Expands one RS-232 serial ports with communication speeds up to 921.6Kbps.
  • With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Full single-lane (or x1) PCI Express throughput.
  • Compliant with ExpressCard 34 and 54mm slot.
  • Built-in ±15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Hot-swapping feature allows you to connect/disconnect devices without powering down the system.
  • Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

SUNIX ECS1S00 was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional RS-232 serial port via a single slim-type 34/54mm ExpressCard slot. ECS1S00 equips SUNIX high performance and realizable chipset SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications. Users will benefit from ExpressCard plug-n-play ease of use, which eliminates the need to open the chassis to add new features. With SUNIX ECS1S00 RS-232 ExpressCard, you can connect serial peripherals such as GPS receivers, serial printers/plotters, barcode scanners, digital cameras, PDAs, Cell Phones and fax/modems.

Specifications

General

Interface RS-232
Controller SUNIX SUN2212 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 1-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 921.6Kbps
Data bit 5, 6, 7, 8
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Driver Support

Microsoft Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Microsoft Server 2000/2003/2008R2 / 2012 (X86/X64)
Microsoft Embedded Windows CE4.2/5.0/6.0 / XP Embedded / POS Ready 2009 /
Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS
FreeBSD FreeBSD 5.3~5.5 / 6.0~6.4
QNX QNX 6.3.2/6.4.0

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
Microsoft Client: XP / Vista / 7 / 8.x / 10 (X86/X64)
Microsoft Server: 2000 / 2003 / 2008 / 2012 (X86/X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

Iron Case 80(W) x 34(D) x 5(H) mm
Plastic Case 36(W) x 44(D) x 20(H) mm

Support

Download Datasheet

Download Driver

Driver WinCE 6.0 Driver V1.2.0.0
Version V1.2.0.0
Update 2013-09-11 15:40:33
Size 301.7KB
OS
Windows CE 6.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS
Driver SUN1999Driver V8.1.0.0 (WHQL) - 20130328.zip
Version Ver.8.1.0.0
Update 2013-06-10 18:04:07
Size 4.3MB
OS
Windows 8 32/64bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32/64 bit
Windows Server 2012 64bit
Windows Server 2003 32/64 bit
Windows Server 2008 R2 64bit
Windows Server 2008 32/64 bit
Windows Embedded Standard
Windows Embedded POSReady 2009
Driver WinCE 6.0_Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:52
Size 336KB
OS
Windows CE 6.0
Driver WinCE 5.0_Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0

ECS1S00

1-port High Speed RS-232 ExpressCard
  • Expands one RS-232 serial ports with communication speeds up to 921.6Kbps.
  • With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Full single-lane (or x1) PCI Express throughput.
  • Compliant with ExpressCard 34 and 54mm slot.
  • Built-in ±15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Hot-swapping feature allows you to connect/disconnect devices without powering down the system.
  • Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

SUNIX ECS1S00 was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional RS-232 serial port via a single slim-type 34/54mm ExpressCard slot. ECS1S00 equips SUNIX high performance and realizable chipset SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications. Users will benefit from ExpressCard plug-n-play ease of use, which eliminates the need to open the chassis to add new features. With SUNIX ECS1S00 RS-232 ExpressCard, you can connect serial peripherals such as GPS receivers, serial printers/plotters, barcode scanners, digital cameras, PDAs, Cell Phones and fax/modems.

Specifications

General

Interface RS-232
Controller SUNIX SUN2212 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 1-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 921.6Kbps
Data bit 5, 6, 7, 8
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Driver Support

Microsoft Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Microsoft Server 2000/2003/2008R2 / 2012 (X86/X64)
Microsoft Embedded Windows CE4.2/5.0/6.0 / XP Embedded / POS Ready 2009 /
Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS
FreeBSD FreeBSD 5.3~5.5 / 6.0~6.4
QNX QNX 6.3.2/6.4.0

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
Microsoft Client: XP / Vista / 7 / 8.x / 10 (X86/X64)
Microsoft Server: 2000 / 2003 / 2008 / 2012 (X86/X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

Iron Case 80(W) x 34(D) x 5(H) mm
Plastic Case 36(W) x 44(D) x 20(H) mm

Support

Download Datasheet

Download Driver

Driver WinCE 6.0 Driver V1.2.0.0
Version V1.2.0.0
Update 2013-09-11 15:40:33
Size 301.7KB
OS
Windows CE 6.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS
Driver SUN1999Driver V8.1.0.0 (WHQL) - 20130328.zip
Version Ver.8.1.0.0
Update 2013-06-10 18:04:07
Size 4.3MB
OS
Windows 8 32/64bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32/64 bit
Windows Server 2012 64bit
Windows Server 2003 32/64 bit
Windows Server 2008 R2 64bit
Windows Server 2008 32/64 bit
Windows Embedded Standard
Windows Embedded POSReady 2009
Driver WinCE 6.0_Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:52
Size 336KB
OS
Windows CE 6.0
Driver WinCE 5.0_Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0

ECS1S00

1-port High Speed RS-232 ExpressCard
  • Expands one RS-232 serial ports with communication speeds up to 921.6Kbps.
  • With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Full single-lane (or x1) PCI Express throughput.
  • Compliant with ExpressCard 34 and 54mm slot.
  • Built-in ±15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Hot-swapping feature allows you to connect/disconnect devices without powering down the system.
  • Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
  • Support Microsoft Windows, Linux, and DOS.

SUNIX ECS1S00 was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional RS-232 serial port via a single slim-type 34/54mm ExpressCard slot. ECS1S00 equips SUNIX high performance and realizable chipset SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications. Users will benefit from ExpressCard plug-n-play ease of use, which eliminates the need to open the chassis to add new features. With SUNIX ECS1S00 RS-232 ExpressCard, you can connect serial peripherals such as GPS receivers, serial printers/plotters, barcode scanners, digital cameras, PDAs, Cell Phones and fax/modems.

Introduction

SUNIX ECS1S00 was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional RS-232 serial port via a single slim-type 34/54mm ExpressCard slot. ECS1S00 equips SUNIX high performance and realizable chipset SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications. Users will benefit from ExpressCard plug-n-play ease of use, which eliminates the need to open the chassis to add new features. With SUNIX ECS1S00 RS-232 ExpressCard, you can connect serial peripherals such as GPS receivers, serial printers/plotters, barcode scanners, digital cameras, PDAs, Cell Phones and fax/modems.

Specifications

General

Interface RS-232
Controller SUNIX SUN2212 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 1-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 921.6Kbps
Data bit 5, 6, 7, 8
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Driver Support

Microsoft Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Microsoft Server 2000/2003/2008R2 / 2012 (X86/X64)
Microsoft Embedded Windows CE4.2/5.0/6.0 / XP Embedded / POS Ready 2009 /
Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS
FreeBSD FreeBSD 5.3~5.5 / 6.0~6.4
QNX QNX 6.3.2/6.4.0

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
Microsoft Client: XP / Vista / 7 / 8.x / 10 (X86/X64)
Microsoft Server: 2000 / 2003 / 2008 / 2012 (X86/X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

Iron Case 80(W) x 34(D) x 5(H) mm
Plastic Case 36(W) x 44(D) x 20(H) mm

Support

Download Datasheet

Download Driver

Driver WinCE 6.0 Driver V1.2.0.0
Version V1.2.0.0
Update 2013-09-11 15:40:33
Size 301.7KB
OS
Windows CE 6.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS
Driver SUN1999Driver V8.1.0.0 (WHQL) - 20130328.zip
Version Ver.8.1.0.0
Update 2013-06-10 18:04:07
Size 4.3MB
OS
Windows 8 32/64bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32/64 bit
Windows Server 2012 64bit
Windows Server 2003 32/64 bit
Windows Server 2008 R2 64bit
Windows Server 2008 32/64 bit
Windows Embedded Standard
Windows Embedded POSReady 2009
Driver WinCE 6.0_Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:52
Size 336KB
OS
Windows CE 6.0
Driver WinCE 5.0_Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0