ECSA14 (phased out)

Serial ATA II ExpressCard
  • Supports PCI Express Base Specification Revision 1.0a.
  • Single-lane (x1) PCI Express throughput rates up to 2.5 Gbps.
  • Compliant with ExpressCard 34/54mm module specification.
  • Compliant with Serial ATA II: Extensions to Serial ATA 1.0a.
  • Built-in one high speed 3.0Gbps SATA II external port.
  • Supports Native Command Queue (NCQ) on SATA II port.
  • Supports Port Multiplier with Command-based Switching on SATA II port.
  • ExpressCard hot plugging and hot swapping features.

Introduction

ExpressCard, the next evolution of the PC Card, combines a smaller form factor and faster performance with the PC Card reliability and ease of use. This card is a single-chip solution for Serial-ATAII compact size ExpressCard module and the interface has a potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each direction) using a single-lane (or x1) PCI Express link. SUNIX ECSA14 is a single chip, one-lane PCI Express to one-port Serial ATA II 3.0 Gb/s host card. It was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional external Serial ATA II port via a single slim-type 34mm wide ExpressCard slot. ECSA14 is fully compatible with Serial ATA Generation 2 specification and it allows you to connect Serial-ATA compatible devices to your computer, such as SATA port multipliers Disk Array Box, Serial-ATA RAID Enclosure, or external storage and ATAPI peripheral.

Specifications

HARDWARE

Mode Serial ATA II 34mm ExpressCard
Controller JMicron JMB360
Port one 3.0Gbps SATA II external port
Speed Data Transfer rate of 2.5 Gbps
support Windows2000/XP/2003/ Vista and Linux 2.6x
Operation temperature 0°C to 60°C
Storage temperature -20°C to 85°C
Operation humidity 5 to 95% RH

Support

Download Manual

Manual 771-ECS140000-003

Download Datasheet

Datasheet ECSA14

ECSA14 (phased out)

Serial ATA II ExpressCard
  • Supports PCI Express Base Specification Revision 1.0a.
  • Single-lane (x1) PCI Express throughput rates up to 2.5 Gbps.
  • Compliant with ExpressCard 34/54mm module specification.
  • Compliant with Serial ATA II: Extensions to Serial ATA 1.0a.
  • Built-in one high speed 3.0Gbps SATA II external port.
  • Supports Native Command Queue (NCQ) on SATA II port.
  • Supports Port Multiplier with Command-based Switching on SATA II port.
  • ExpressCard hot plugging and hot swapping features.

Introduction

ExpressCard, the next evolution of the PC Card, combines a smaller form factor and faster performance with the PC Card reliability and ease of use. This card is a single-chip solution for Serial-ATAII compact size ExpressCard module and the interface has a potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each direction) using a single-lane (or x1) PCI Express link. SUNIX ECSA14 is a single chip, one-lane PCI Express to one-port Serial ATA II 3.0 Gb/s host card. It was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional external Serial ATA II port via a single slim-type 34mm wide ExpressCard slot. ECSA14 is fully compatible with Serial ATA Generation 2 specification and it allows you to connect Serial-ATA compatible devices to your computer, such as SATA port multipliers Disk Array Box, Serial-ATA RAID Enclosure, or external storage and ATAPI peripheral.

Specifications

HARDWARE

Mode Serial ATA II 34mm ExpressCard
Controller JMicron JMB360
Port one 3.0Gbps SATA II external port
Speed Data Transfer rate of 2.5 Gbps
support Windows2000/XP/2003/ Vista and Linux 2.6x
Operation temperature 0°C to 60°C
Storage temperature -20°C to 85°C
Operation humidity 5 to 95% RH

Support

Download Manual

Manual 771-ECS140000-003

Download Datasheet

Datasheet ECSA14

ECSA14 (phased out)

Serial ATA II ExpressCard
  • Supports PCI Express Base Specification Revision 1.0a.
  • Single-lane (x1) PCI Express throughput rates up to 2.5 Gbps.
  • Compliant with ExpressCard 34/54mm module specification.
  • Compliant with Serial ATA II: Extensions to Serial ATA 1.0a.
  • Built-in one high speed 3.0Gbps SATA II external port.
  • Supports Native Command Queue (NCQ) on SATA II port.
  • Supports Port Multiplier with Command-based Switching on SATA II port.
  • ExpressCard hot plugging and hot swapping features.

Introduction

ExpressCard, the next evolution of the PC Card, combines a smaller form factor and faster performance with the PC Card reliability and ease of use. This card is a single-chip solution for Serial-ATAII compact size ExpressCard module and the interface has a potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each direction) using a single-lane (or x1) PCI Express link. SUNIX ECSA14 is a single chip, one-lane PCI Express to one-port Serial ATA II 3.0 Gb/s host card. It was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional external Serial ATA II port via a single slim-type 34mm wide ExpressCard slot. ECSA14 is fully compatible with Serial ATA Generation 2 specification and it allows you to connect Serial-ATA compatible devices to your computer, such as SATA port multipliers Disk Array Box, Serial-ATA RAID Enclosure, or external storage and ATAPI peripheral.

Specifications

HARDWARE

Mode Serial ATA II 34mm ExpressCard
Controller JMicron JMB360
Port one 3.0Gbps SATA II external port
Speed Data Transfer rate of 2.5 Gbps
support Windows2000/XP/2003/ Vista and Linux 2.6x
Operation temperature 0°C to 60°C
Storage temperature -20°C to 85°C
Operation humidity 5 to 95% RH

Support

Download Manual

Manual 771-ECS140000-003

Download Datasheet

Datasheet ECSA14

ECSA14 (phased out)

Serial ATA II ExpressCard
  • Supports PCI Express Base Specification Revision 1.0a.
  • Single-lane (x1) PCI Express throughput rates up to 2.5 Gbps.
  • Compliant with ExpressCard 34/54mm module specification.
  • Compliant with Serial ATA II: Extensions to Serial ATA 1.0a.
  • Built-in one high speed 3.0Gbps SATA II external port.
  • Supports Native Command Queue (NCQ) on SATA II port.
  • Supports Port Multiplier with Command-based Switching on SATA II port.
  • ExpressCard hot plugging and hot swapping features.

ExpressCard, the next evolution of the PC Card, combines a smaller form factor and faster performance with the PC Card reliability and ease of use. This card is a single-chip solution for Serial-ATAII compact size ExpressCard module and the interface has a potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each direction) using a single-lane (or x1) PCI Express link. SUNIX ECSA14 is a single chip, one-lane PCI Express to one-port Serial ATA II 3.0 Gb/s host card. It was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional external Serial ATA II port via a single slim-type 34mm wide ExpressCard slot. ECSA14 is fully compatible with Serial ATA Generation 2 specification and it allows you to connect Serial-ATA compatible devices to your computer, such as SATA port multipliers Disk Array Box, Serial-ATA RAID Enclosure, or external storage and ATAPI peripheral.

Introduction

ExpressCard, the next evolution of the PC Card, combines a smaller form factor and faster performance with the PC Card reliability and ease of use. This card is a single-chip solution for Serial-ATAII compact size ExpressCard module and the interface has a potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each direction) using a single-lane (or x1) PCI Express link. SUNIX ECSA14 is a single chip, one-lane PCI Express to one-port Serial ATA II 3.0 Gb/s host card. It was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add one additional external Serial ATA II port via a single slim-type 34mm wide ExpressCard slot. ECSA14 is fully compatible with Serial ATA Generation 2 specification and it allows you to connect Serial-ATA compatible devices to your computer, such as SATA port multipliers Disk Array Box, Serial-ATA RAID Enclosure, or external storage and ATAPI peripheral.

Specifications

HARDWARE

Mode Serial ATA II 34mm ExpressCard
Controller JMicron JMB360
Port one 3.0Gbps SATA II external port
Speed Data Transfer rate of 2.5 Gbps
support Windows2000/XP/2003/ Vista and Linux 2.6x
Operation temperature 0°C to 60°C
Storage temperature -20°C to 85°C
Operation humidity 5 to 95% RH

Support

Download Manual

Manual 771-ECS140000-003

Download Datasheet

Datasheet ECSA14