|
|
CC&C Products > Multi-I/O / Parallel Cards > PCI Cards |
|
|
| |
 |
| |
Introduction
The majority of today´s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5069U Multi I/O board, users can expand one RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5069U is compatible with both 32/64-bit PCI architecture supporting 3.3 and 5V Bus, allowing the board to be installed in virtually any PC system. Furthermore, SUNIX MIO5069U Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, Linux, making it the best and most economical solution for commercial and industrial applications.
Features
- Expands 1-port RS-232 COM and 1-port IEEE1284 LPT on system.
- Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
- High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
- Expands one RS-232 serial port with communication speed up to 115.2Kbps.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±2KV ESD protection for all serial signals.
- Ideal for embedded computing applications.
- Support IEEE 1284-1994 parallel port standard.
ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port)
- Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
- Plug-n-Play, I/O address and IRQ assigned by system.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS.
Specifications
Description
|
| Product Description |
1-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Embedded Type Board |
General
|
| Interface |
RS-232 and IEEE1284 |
| Controller |
SUNIX SUN1989 (16C950 UART Compatible) |
| Bus |
Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 |
| IRQ & IO |
Assigned by System |
Serial Communication
|
| Interface |
RS-232 |
| No. of Port |
1-port |
| FIFO |
128 byte (Hardware) |
| Signal |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
| Baud rate |
50 bps to 115.2 Kbps |
| Data bit |
5,6,7,8 |
| Stop bit |
1,1.5,2 |
| Parity |
None, Even, Odd, Space, Mark |
| Flow Control |
None, Xon/Xoff, RTS/CTS |
| Protection |
±2KV ESD protection for each signal Human Body Model (HBM) |
| PCB connector |
Pin Header (pitch 2.0mm) |
Parallel Communication
|
| Interface |
IEEE1284 |
| No. of Port |
1-port |
| FIFO |
16 byte (Hardware) |
| Signal |
SPP/ECP/EPP/BPP |
| Speed |
Maximum 1.8MBps |
| PCB connector |
13 x 2 Pin Header |
| Cable Connector |
DB25 Female |
Driver Support
|
| Microsoft Client |
Windows XP/Vista/7 (X86/X64) |
| Microsoft Server |
Windows 2000/2003/2008 (X86/X64) |
| Microsoft Embedded |
Windows XP Embedded/POS Ready 2009/Embedded System 2009/Embedded Standard 7 |
| Linux |
Linux 2.4.x / 2.6.x / 3.x |
| DOS |
DOS |
Regulatory Approvals
|
| Hardware |
EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, C-Tick: CISPR22 AS/NZS, RoHS |
| Software |
Microsoft WHQL Windows
• Microsoft Client: XP/Vista/7 (X86/X64)
• Microsoft Server: 2000/2003/2008 (X86/X64) |
Environment
|
| Operation Temperature |
0 to 60°C (32 to 140°F) |
| Operation Humidity |
5 to 95% RH |
| Storage Temperature |
-20 to 85°C (-4 to 185°F) |
Dimension
|
| PCB Dimension |
120 x 65 mm |
| Bracket |
Standard 121 mm |
| Bracket Space |
2 |
| |
|
Note:
* Do not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode. |
|
|
|
|
;){kind=small}
