Back To
Solution Provider
Solution Provider
MIO5069UH
1-port High Speed RS-232 & 1-port Parallel Universal PCI Multi-I/O Embedded Type Board
The majority of today´s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5069UH Multi I/O board, users can expand one RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5069UH is compatible with both 32/64-bit PCI architecture supporting 3.3 and 5V Bus, allowing the board to be installed in virtually any PC system. Furthermore, SUNIX MIO5069UH Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, Linux, making it the best and most economical solution for commercial and industrial applications.
Driver:
..0.0 (WHQL) - 20120907.zip
Version:
Ver.8.0.0.0
Update:
2012-10-22 10:45:29
Size:
4.3MB
OS:
Windows 2000
Windows XP 32/64 bit
Windows Server 2003 32/64 bit
Windows Vista 32/64 bit
Windows 7 32/64 bit
Windows Server 2008 32/64 bit
Windows Server 2008 R2 64bit
Driver:
SUNDOS1.00.00.003.zip
Version:
Ver.1.0.0.3
Update:
2012-07-12 17:44:29
Size:
21KB
OS:
DOS
Driver:
V2.0.1.0.zip
Version:
Ver.2.0.1.0
Update:
2012-04-10 08:41:35
Size:
68KB
OS:
Linux 2.4x/2.6x/3.x
Specifications
Description |
|
| Product Description | 1-port High Speed RS-232 & 1-port Parallel Universal PCI Multi-I/O Embedded Type Board |
General |
|
| Interface | RS-232 and IEEE1284 |
| Controller | SUNIX SUN1989 (16C950 UART Compatible) |
| Bus | Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 |
| IRQ & IO | Assigned by System |
Serial Communication |
|
| Interface | RS-232 |
| No. of Port | 1-port |
| FIFO | 128 byte (Hardware) |
| Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
| Baud rate | 50 bps to 115.2 Kbps |
| Data bit | 5,6,7,8 |
| Stop bit | 1,1.5,2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | None, Xon/Xoff, RTS/CTS |
| Protection |
±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV IEC1000-4-2 Contact Discharge |
| PCB connector | Pin Header (pitch 2.0mm) |
Parallel Communication |
|
| Interface | IEEE1284 |
| No. of Port | 1-port |
| FIFO | 16 byte (Hardware) |
| Signal | SPP/ECP/EPP/BPP |
| Speed | Maximum 1.8MBps |
| PCB connector | 13 x 2 Pin Header |
| Cable Connector | DB25 Female |
Driver Support |
|
| Microsoft Client | Windows XP/Vista/7/8 (X86/X64) |
| Microsoft Server | Windows 2000/2003/2008/2012 (X86/X64) |
| Microsoft Embedded | Windows XP Embedded/POS Ready 2009/Embedded System 2009/Embedded Standard 7 |
| Linux | Linux 2.4.x / 2.6.x / 3.x |
| DOS | DOS |
Regulatory Approvals |
|
| Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, C-Tick: CISPR22 AS/NZS, RoHS |
| Software |
Microsoft WHQL Windows • Microsoft Client: XP/Vista/7/8 (X86/X64) • Microsoft Server: 2000/2003/2008/2012 (X86/X64) |
Environment |
|
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 85°C (-4 to 185°F) |
Dimension |
|
| PCB Dimension | 120 x 65 mm |
| Bracket | Standard 121 mm |
| Bracket Space | 2 |
|
Note: * Do not support LPT Key Locker Parallel device. * LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode. * ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode. | |
Features
- Expands 1-port RS-232 COM and 1-port IEEE1284 LPT on system.
- Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
- High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
- Expands one RS-232 serial port with communication speed up to 921.6Kbps.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
- Ideal for embedded computing applications.
-
Support IEEE 1284-1994 parallel port standard.
* ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
* SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port) - Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
- Plug-n-Play, I/O address and IRQ assigned by system.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS.
Follow sunix
