MIO5479AL (phased out) (Replacement: MIO6479AL)

2-port RS-232 & 1-port Parallel PCI Express Low Profile Multi-I/O Board
  • Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
  • Designed to meet PCI Express Base Specification Revision 1.1.
  • High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
  • Expands two RS-232 serial port with communication speed up to 115.2Kbps.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ±2KV ESD protection for all serial signals.
  • Support IEEE 1284-1994 parallel port standard
    * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
    * SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port)
  • Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
  • Low profile bracket design idea for slim or portable PC.
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

The majority of today’s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5479AL Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5479AL is compatible with PCI Express x1, x2, x4, x8 and x16 lane and PCI/PCI-x Bus, allowing the board to be installed in any slim size PC-based system with low profile bracket structure. Furthermore, SUNIX MIO5479AL Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, WinCE, Linux, making it the best and most economical solution for commercial and industrial applications.

Specifications

Description

Product Description 2-port RS-232 & 1-port Parallel PCI Express Low Profile Multi-I/O Board

General

Interface RS-232 and IEEE1284
Controller SUNIX SUN1989 (16C950 UART Compatible)
Bus PCI Express one lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 2-port
FIFO 128 byte (Hardware)
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI
Baud rate 50 bps to 115.2 Kbps
Data bit 5,6,7,8
Stop bit 1,1.5,2
Parity None, Even, Odd, Space, Mark
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±2KV ESD protection for each signal Human Body Model (HBM)
PCB connector DB44 Female
Cable Connector DB9 Male

Parallel Communication

Interface IEEE1284
No. of Port 1-port
FIFO 16 byte (Hardware)
Signal SPP/ECP/EPP/BPP
Speed Maximum 1.8MBps
PCB connector DB44 Female
Cable Connector DB25 Female

Driver Support

Windows Client XP/Vista/7/8/8.1 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3,
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP/Vista/7/8/8.1 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 112 x 68 mm
Bracket Low Profile 80 mm
Bracket Space 1
   
Note:
* Do not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Support

Download Manual

Manual 771-9PCIEMIO2-S01

Download Datasheet

Datasheet MIO5479AL-Datasheet-V10

MIO5479AL (phased out) (Replacement: MIO6479AL)

2-port RS-232 & 1-port Parallel PCI Express Low Profile Multi-I/O Board
  • Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
  • Designed to meet PCI Express Base Specification Revision 1.1.
  • High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
  • Expands two RS-232 serial port with communication speed up to 115.2Kbps.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ±2KV ESD protection for all serial signals.
  • Support IEEE 1284-1994 parallel port standard
    * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
    * SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port)
  • Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
  • Low profile bracket design idea for slim or portable PC.
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

The majority of today’s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5479AL Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5479AL is compatible with PCI Express x1, x2, x4, x8 and x16 lane and PCI/PCI-x Bus, allowing the board to be installed in any slim size PC-based system with low profile bracket structure. Furthermore, SUNIX MIO5479AL Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, WinCE, Linux, making it the best and most economical solution for commercial and industrial applications.

Specifications

Description

Product Description 2-port RS-232 & 1-port Parallel PCI Express Low Profile Multi-I/O Board

General

Interface RS-232 and IEEE1284
Controller SUNIX SUN1989 (16C950 UART Compatible)
Bus PCI Express one lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 2-port
FIFO 128 byte (Hardware)
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI
Baud rate 50 bps to 115.2 Kbps
Data bit 5,6,7,8
Stop bit 1,1.5,2
Parity None, Even, Odd, Space, Mark
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±2KV ESD protection for each signal Human Body Model (HBM)
PCB connector DB44 Female
Cable Connector DB9 Male

Parallel Communication

Interface IEEE1284
No. of Port 1-port
FIFO 16 byte (Hardware)
Signal SPP/ECP/EPP/BPP
Speed Maximum 1.8MBps
PCB connector DB44 Female
Cable Connector DB25 Female

Driver Support

Windows Client XP/Vista/7/8/8.1 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3,
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP/Vista/7/8/8.1 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 112 x 68 mm
Bracket Low Profile 80 mm
Bracket Space 1
   
Note:
* Do not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Support

Download Manual

Manual 771-9PCIEMIO2-S01

Download Datasheet

Datasheet MIO5479AL-Datasheet-V10

MIO5479AL (phased out) (Replacement: MIO6479AL)

2-port RS-232 & 1-port Parallel PCI Express Low Profile Multi-I/O Board
  • Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
  • Designed to meet PCI Express Base Specification Revision 1.1.
  • High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
  • Expands two RS-232 serial port with communication speed up to 115.2Kbps.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ±2KV ESD protection for all serial signals.
  • Support IEEE 1284-1994 parallel port standard
    * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
    * SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port)
  • Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
  • Low profile bracket design idea for slim or portable PC.
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

The majority of today’s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5479AL Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5479AL is compatible with PCI Express x1, x2, x4, x8 and x16 lane and PCI/PCI-x Bus, allowing the board to be installed in any slim size PC-based system with low profile bracket structure. Furthermore, SUNIX MIO5479AL Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, WinCE, Linux, making it the best and most economical solution for commercial and industrial applications.

Specifications

Description

Product Description 2-port RS-232 & 1-port Parallel PCI Express Low Profile Multi-I/O Board

General

Interface RS-232 and IEEE1284
Controller SUNIX SUN1989 (16C950 UART Compatible)
Bus PCI Express one lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 2-port
FIFO 128 byte (Hardware)
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI
Baud rate 50 bps to 115.2 Kbps
Data bit 5,6,7,8
Stop bit 1,1.5,2
Parity None, Even, Odd, Space, Mark
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±2KV ESD protection for each signal Human Body Model (HBM)
PCB connector DB44 Female
Cable Connector DB9 Male

Parallel Communication

Interface IEEE1284
No. of Port 1-port
FIFO 16 byte (Hardware)
Signal SPP/ECP/EPP/BPP
Speed Maximum 1.8MBps
PCB connector DB44 Female
Cable Connector DB25 Female

Driver Support

Windows Client XP/Vista/7/8/8.1 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3,
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP/Vista/7/8/8.1 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 112 x 68 mm
Bracket Low Profile 80 mm
Bracket Space 1
   
Note:
* Do not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Support

Download Manual

Manual 771-9PCIEMIO2-S01

Download Datasheet

Datasheet MIO5479AL-Datasheet-V10

MIO5479AL (phased out) (Replacement: MIO6479AL)

2-port RS-232 & 1-port Parallel PCI Express Low Profile Multi-I/O Board
  • Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
  • Designed to meet PCI Express Base Specification Revision 1.1.
  • High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
  • Expands two RS-232 serial port with communication speed up to 115.2Kbps.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ±2KV ESD protection for all serial signals.
  • Support IEEE 1284-1994 parallel port standard
    * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
    * SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port)
  • Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
  • Low profile bracket design idea for slim or portable PC.
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

The majority of today’s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5479AL Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5479AL is compatible with PCI Express x1, x2, x4, x8 and x16 lane and PCI/PCI-x Bus, allowing the board to be installed in any slim size PC-based system with low profile bracket structure. Furthermore, SUNIX MIO5479AL Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, WinCE, Linux, making it the best and most economical solution for commercial and industrial applications.

Introduction

The majority of today’s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5479AL Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5479AL is compatible with PCI Express x1, x2, x4, x8 and x16 lane and PCI/PCI-x Bus, allowing the board to be installed in any slim size PC-based system with low profile bracket structure. Furthermore, SUNIX MIO5479AL Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, WinCE, Linux, making it the best and most economical solution for commercial and industrial applications.

Specifications

Description

Product Description 2-port RS-232 & 1-port Parallel PCI Express Low Profile Multi-I/O Board

General

Interface RS-232 and IEEE1284
Controller SUNIX SUN1989 (16C950 UART Compatible)
Bus PCI Express one lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 2-port
FIFO 128 byte (Hardware)
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI
Baud rate 50 bps to 115.2 Kbps
Data bit 5,6,7,8
Stop bit 1,1.5,2
Parity None, Even, Odd, Space, Mark
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±2KV ESD protection for each signal Human Body Model (HBM)
PCB connector DB44 Female
Cable Connector DB9 Male

Parallel Communication

Interface IEEE1284
No. of Port 1-port
FIFO 16 byte (Hardware)
Signal SPP/ECP/EPP/BPP
Speed Maximum 1.8MBps
PCB connector DB44 Female
Cable Connector DB25 Female

Driver Support

Windows Client XP/Vista/7/8/8.1 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3,
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP/Vista/7/8/8.1 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 112 x 68 mm
Bracket Low Profile 80 mm
Bracket Space 1
   
Note:
* Do not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Support

Download Manual

Manual 771-9PCIEMIO2-S01

Download Datasheet

Datasheet MIO5479AL-Datasheet-V10