PAR5008R

1-port Remap IEEE1284 Parallel Universal PCI Board
  • High reliability SUNIX UL7502AQ Parallel controller on-board.
  • Expand single IEEE1284 compatible DB-25 type Parallel LPT port on system.
  • Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
  • Compliance with PCI 33MHz Version 3.0/2.3/2.2/2.1 specification.
  • Support IEEE 1284-1994 parallel port standard with user configuration
    * ECP (Enhance Capacity Port) / EPP (Enhance Parallel Port)
    * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port)
  • Support legacy ISA address (278, 378, 3BC) or standard PCI Plug-n-Play modes.
  • Install as a fully featured I/O mapped and operation configured as computer's native parallel LPT port.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

SUNIX PAR5008R PCI Remap Parallel card enables users to expand one additional real ECP/EPP/SPP/BPP communication LPT port on their PC-based system for connecting their parallel device. This board can be installed as a fully featured I/O mapped parallel port as 278, 378, and 3BC legacy ISA address under Microsoft Windows and DOS operation systems. Besides, there’re some software (hardware) could not switch operation mode automatically, and user has to require changing LPT settings to the particular mode. SUNIX PAR5008R can force setting SPP, Bi-Directional, EPP, or ECP mode by jumper settings!

With legacy ISA address and Parallel operation mode selectiveness feature, SUNIX PAR5008R simulates onboard native parallel port operation completely. User can connect traditional software protection dongles, JTAG chip programmers, data acquisition, machine process control, scientific measurement systems, and other parallel devices as well as computer's native parallel port. SUNIX PAR5008R Remap card is designed with SUNIX high performance and realizable Parallel connectivity controller, UL7502AQ and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation applications.

Features

Easy Hardware Settings for Legacy LPT Configuration

SUNIX PAR5008R can simulate onboard native Parallel port operation mode. This board makes a breakthrough of PCI plug-n-play rule, and it allows user remapping legacy ISA address to the LPT port. User can select 278, 378, or 3BC address and independent ECP/EPP/BPP/ SPP mode by on board hardware jumper settings. It’s the same function as traditional motherboard BIOS setting, but SUNIX board accomplish remap feature by hardware jumper.

Provide Real LPT Port for All Legacy Devices

Unlike USB to parallel adapters, SUNIX Remap Parallel Card function exactly likes a computer's native parallel port and provides a true LPT port in order for your PC to work properly with devices that require a LPT port for setup and configuration. For many legacy devices like parallel scanners, zip drives or other older parallel-port devices, they only work with a real parallel LPT port from a computer and in many cases can not work with virtual parallel ports provided from those USB to parallel port adapter cables to simulate parallel connection.

Support for Any Windows-based PC

SUNIX parallel card supports all Microsoft Windows operation systems, including 32/64-bit Microsoft Windows Server (2008, 2003, 2000) and Widows Client (7, Vista, XP, 98). Furthermore, Remapping function is workable with windows system default driver. It makes your whole system working properly without any potential conflicting issue when connecting legacy parallel devices.

Support All Devices Requiring Hardware DB25-Pin Connection

The DB 25-pin connector of this board is suitable for connection with Printer requiring parallel interface, Scanners, LapLink, Zip Drive, Tape Drive, LS-120 Drive, CD-R/RW, EPROM Programmer, Intelligent UPS, Plotter, Bank Passbook Printer, software protection dongles, JTAG chip programmers, data acquisition, machine process control, scientific measurement systems, etc.


Specifications

Parallel Communication

Interface IEEE1284
BUS Universal PCI 64/32bit 3.3V/5V
PCI Ver 3.0, 2.3, 2.2, 2.1
Controller SUNIX UL7502AQ
IO 378, 278, 3BC or PCI Plug-n-play Assigned by System
No. of Port 1-port
Speed Maximum 1.8MBps
Mode SPP/ECP/EPP/BPP ( Auto-switching or User-Defined)
FIFO 16byte Hardware
PCB Connector DB25 Female
Protection ±2KV ESD protection for each signal Human Body Model (HBM)

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3,
FCC Part 15 Class B, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP/Vista/7/8/8.1 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 120 x 61 mm
Bracket Standard 121 mm
Bracket Space 1

Note:

* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Support

Download Datasheet

Download Driver

Driver SUN1999Driver_V8.2.3.0_(WHQL)
Version Ver 8.2.3.
Update 2017-12-11 17:22:37
Size 9.2MB
OS
Windows 10 RS2 32/64 bit
Driver SUN1999Driver_V8.2.2.0_(WHQL)
Version Ver 8.2.2.0
Update 2017-12-11 17:28:03
Size 9.2MB
OS
Windows 10 RS1 32/64 bit
Driver SUN1999Driver_V8.3.0.0_legacy (WHQL)
Version Ver 8.3.0.0
Update 2017-12-01 15:53:31
Size 9.7MB
OS
Windows 8.1(beta) 32/64 bit
Windows 8.0 32/64 bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32/64 bit
Windows Server 2012R2 64-bit
Windows Server 2012 64Bit
Windows Server 2003 32/64 bit
Windows Server 2008 R2 64bit
Windows Server 2008 32/64 bit
Windows Embedded Standard
Windows Embedded POSReady 2009
Driver SUN1999Driver V7.2.0.0 (WHQL)
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver snx_V2.0.4.3
Version Ver 2.0.4.3
Update 2017-11-22 18:01:14
Size 70.9KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver ParallelPortRegiserAccessTool
Version V1.0
Update 2015-12-30 09:45:45
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8 32/64bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32bit
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS

PAR5008R

1-port Remap IEEE1284 Parallel Universal PCI Board
  • High reliability SUNIX UL7502AQ Parallel controller on-board.
  • Expand single IEEE1284 compatible DB-25 type Parallel LPT port on system.
  • Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
  • Compliance with PCI 33MHz Version 3.0/2.3/2.2/2.1 specification.
  • Support IEEE 1284-1994 parallel port standard with user configuration
    * ECP (Enhance Capacity Port) / EPP (Enhance Parallel Port)
    * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port)
  • Support legacy ISA address (278, 378, 3BC) or standard PCI Plug-n-Play modes.
  • Install as a fully featured I/O mapped and operation configured as computer's native parallel LPT port.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

SUNIX PAR5008R PCI Remap Parallel card enables users to expand one additional real ECP/EPP/SPP/BPP communication LPT port on their PC-based system for connecting their parallel device. This board can be installed as a fully featured I/O mapped parallel port as 278, 378, and 3BC legacy ISA address under Microsoft Windows and DOS operation systems. Besides, there’re some software (hardware) could not switch operation mode automatically, and user has to require changing LPT settings to the particular mode. SUNIX PAR5008R can force setting SPP, Bi-Directional, EPP, or ECP mode by jumper settings!

With legacy ISA address and Parallel operation mode selectiveness feature, SUNIX PAR5008R simulates onboard native parallel port operation completely. User can connect traditional software protection dongles, JTAG chip programmers, data acquisition, machine process control, scientific measurement systems, and other parallel devices as well as computer's native parallel port. SUNIX PAR5008R Remap card is designed with SUNIX high performance and realizable Parallel connectivity controller, UL7502AQ and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation applications.

Features

Easy Hardware Settings for Legacy LPT Configuration

SUNIX PAR5008R can simulate onboard native Parallel port operation mode. This board makes a breakthrough of PCI plug-n-play rule, and it allows user remapping legacy ISA address to the LPT port. User can select 278, 378, or 3BC address and independent ECP/EPP/BPP/ SPP mode by on board hardware jumper settings. It’s the same function as traditional motherboard BIOS setting, but SUNIX board accomplish remap feature by hardware jumper.

Provide Real LPT Port for All Legacy Devices

Unlike USB to parallel adapters, SUNIX Remap Parallel Card function exactly likes a computer's native parallel port and provides a true LPT port in order for your PC to work properly with devices that require a LPT port for setup and configuration. For many legacy devices like parallel scanners, zip drives or other older parallel-port devices, they only work with a real parallel LPT port from a computer and in many cases can not work with virtual parallel ports provided from those USB to parallel port adapter cables to simulate parallel connection.

Support for Any Windows-based PC

SUNIX parallel card supports all Microsoft Windows operation systems, including 32/64-bit Microsoft Windows Server (2008, 2003, 2000) and Widows Client (7, Vista, XP, 98). Furthermore, Remapping function is workable with windows system default driver. It makes your whole system working properly without any potential conflicting issue when connecting legacy parallel devices.

Support All Devices Requiring Hardware DB25-Pin Connection

The DB 25-pin connector of this board is suitable for connection with Printer requiring parallel interface, Scanners, LapLink, Zip Drive, Tape Drive, LS-120 Drive, CD-R/RW, EPROM Programmer, Intelligent UPS, Plotter, Bank Passbook Printer, software protection dongles, JTAG chip programmers, data acquisition, machine process control, scientific measurement systems, etc.


Specifications

Parallel Communication

Interface IEEE1284
BUS Universal PCI 64/32bit 3.3V/5V
PCI Ver 3.0, 2.3, 2.2, 2.1
Controller SUNIX UL7502AQ
IO 378, 278, 3BC or PCI Plug-n-play Assigned by System
No. of Port 1-port
Speed Maximum 1.8MBps
Mode SPP/ECP/EPP/BPP ( Auto-switching or User-Defined)
FIFO 16byte Hardware
PCB Connector DB25 Female
Protection ±2KV ESD protection for each signal Human Body Model (HBM)

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3,
FCC Part 15 Class B, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP/Vista/7/8/8.1 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 120 x 61 mm
Bracket Standard 121 mm
Bracket Space 1

Note:

* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Support

Download Datasheet

Download Driver

Driver SUN1999Driver_V8.2.3.0_(WHQL)
Version Ver 8.2.3.
Update 2017-12-11 17:22:37
Size 9.2MB
OS
Windows 10 RS2 32/64 bit
Driver SUN1999Driver_V8.2.2.0_(WHQL)
Version Ver 8.2.2.0
Update 2017-12-11 17:28:03
Size 9.2MB
OS
Windows 10 RS1 32/64 bit
Driver SUN1999Driver_V8.3.0.0_legacy (WHQL)
Version Ver 8.3.0.0
Update 2017-12-01 15:53:31
Size 9.7MB
OS
Windows 8.1(beta) 32/64 bit
Windows 8.0 32/64 bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32/64 bit
Windows Server 2012R2 64-bit
Windows Server 2012 64Bit
Windows Server 2003 32/64 bit
Windows Server 2008 R2 64bit
Windows Server 2008 32/64 bit
Windows Embedded Standard
Windows Embedded POSReady 2009
Driver SUN1999Driver V7.2.0.0 (WHQL)
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver snx_V2.0.4.3
Version Ver 2.0.4.3
Update 2017-11-22 18:01:14
Size 70.9KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver ParallelPortRegiserAccessTool
Version V1.0
Update 2015-12-30 09:45:45
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8 32/64bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32bit
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS

PAR5008R

1-port Remap IEEE1284 Parallel Universal PCI Board
  • High reliability SUNIX UL7502AQ Parallel controller on-board.
  • Expand single IEEE1284 compatible DB-25 type Parallel LPT port on system.
  • Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
  • Compliance with PCI 33MHz Version 3.0/2.3/2.2/2.1 specification.
  • Support IEEE 1284-1994 parallel port standard with user configuration
    * ECP (Enhance Capacity Port) / EPP (Enhance Parallel Port)
    * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port)
  • Support legacy ISA address (278, 378, 3BC) or standard PCI Plug-n-Play modes.
  • Install as a fully featured I/O mapped and operation configured as computer's native parallel LPT port.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

SUNIX PAR5008R PCI Remap Parallel card enables users to expand one additional real ECP/EPP/SPP/BPP communication LPT port on their PC-based system for connecting their parallel device. This board can be installed as a fully featured I/O mapped parallel port as 278, 378, and 3BC legacy ISA address under Microsoft Windows and DOS operation systems. Besides, there’re some software (hardware) could not switch operation mode automatically, and user has to require changing LPT settings to the particular mode. SUNIX PAR5008R can force setting SPP, Bi-Directional, EPP, or ECP mode by jumper settings!

With legacy ISA address and Parallel operation mode selectiveness feature, SUNIX PAR5008R simulates onboard native parallel port operation completely. User can connect traditional software protection dongles, JTAG chip programmers, data acquisition, machine process control, scientific measurement systems, and other parallel devices as well as computer's native parallel port. SUNIX PAR5008R Remap card is designed with SUNIX high performance and realizable Parallel connectivity controller, UL7502AQ and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation applications.

Features

Easy Hardware Settings for Legacy LPT Configuration

SUNIX PAR5008R can simulate onboard native Parallel port operation mode. This board makes a breakthrough of PCI plug-n-play rule, and it allows user remapping legacy ISA address to the LPT port. User can select 278, 378, or 3BC address and independent ECP/EPP/BPP/ SPP mode by on board hardware jumper settings. It’s the same function as traditional motherboard BIOS setting, but SUNIX board accomplish remap feature by hardware jumper.

Provide Real LPT Port for All Legacy Devices

Unlike USB to parallel adapters, SUNIX Remap Parallel Card function exactly likes a computer's native parallel port and provides a true LPT port in order for your PC to work properly with devices that require a LPT port for setup and configuration. For many legacy devices like parallel scanners, zip drives or other older parallel-port devices, they only work with a real parallel LPT port from a computer and in many cases can not work with virtual parallel ports provided from those USB to parallel port adapter cables to simulate parallel connection.

Support for Any Windows-based PC

SUNIX parallel card supports all Microsoft Windows operation systems, including 32/64-bit Microsoft Windows Server (2008, 2003, 2000) and Widows Client (7, Vista, XP, 98). Furthermore, Remapping function is workable with windows system default driver. It makes your whole system working properly without any potential conflicting issue when connecting legacy parallel devices.

Support All Devices Requiring Hardware DB25-Pin Connection

The DB 25-pin connector of this board is suitable for connection with Printer requiring parallel interface, Scanners, LapLink, Zip Drive, Tape Drive, LS-120 Drive, CD-R/RW, EPROM Programmer, Intelligent UPS, Plotter, Bank Passbook Printer, software protection dongles, JTAG chip programmers, data acquisition, machine process control, scientific measurement systems, etc.


Specifications

Parallel Communication

Interface IEEE1284
BUS Universal PCI 64/32bit 3.3V/5V
PCI Ver 3.0, 2.3, 2.2, 2.1
Controller SUNIX UL7502AQ
IO 378, 278, 3BC or PCI Plug-n-play Assigned by System
No. of Port 1-port
Speed Maximum 1.8MBps
Mode SPP/ECP/EPP/BPP ( Auto-switching or User-Defined)
FIFO 16byte Hardware
PCB Connector DB25 Female
Protection ±2KV ESD protection for each signal Human Body Model (HBM)

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3,
FCC Part 15 Class B, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP/Vista/7/8/8.1 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 120 x 61 mm
Bracket Standard 121 mm
Bracket Space 1

Note:

* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Support

Download Datasheet

Download Driver

Driver SUN1999Driver_V8.2.3.0_(WHQL)
Version Ver 8.2.3.
Update 2017-12-11 17:22:37
Size 9.2MB
OS
Windows 10 RS2 32/64 bit
Driver SUN1999Driver_V8.2.2.0_(WHQL)
Version Ver 8.2.2.0
Update 2017-12-11 17:28:03
Size 9.2MB
OS
Windows 10 RS1 32/64 bit
Driver SUN1999Driver_V8.3.0.0_legacy (WHQL)
Version Ver 8.3.0.0
Update 2017-12-01 15:53:31
Size 9.7MB
OS
Windows 8.1(beta) 32/64 bit
Windows 8.0 32/64 bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32/64 bit
Windows Server 2012R2 64-bit
Windows Server 2012 64Bit
Windows Server 2003 32/64 bit
Windows Server 2008 R2 64bit
Windows Server 2008 32/64 bit
Windows Embedded Standard
Windows Embedded POSReady 2009
Driver SUN1999Driver V7.2.0.0 (WHQL)
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver snx_V2.0.4.3
Version Ver 2.0.4.3
Update 2017-11-22 18:01:14
Size 70.9KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver ParallelPortRegiserAccessTool
Version V1.0
Update 2015-12-30 09:45:45
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8 32/64bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32bit
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS

PAR5008R

1-port Remap IEEE1284 Parallel Universal PCI Board
  • High reliability SUNIX UL7502AQ Parallel controller on-board.
  • Expand single IEEE1284 compatible DB-25 type Parallel LPT port on system.
  • Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
  • Compliance with PCI 33MHz Version 3.0/2.3/2.2/2.1 specification.
  • Support IEEE 1284-1994 parallel port standard with user configuration
    * ECP (Enhance Capacity Port) / EPP (Enhance Parallel Port)
    * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port)
  • Support legacy ISA address (278, 378, 3BC) or standard PCI Plug-n-Play modes.
  • Install as a fully featured I/O mapped and operation configured as computer's native parallel LPT port.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

SUNIX PAR5008R PCI Remap Parallel card enables users to expand one additional real ECP/EPP/SPP/BPP communication LPT port on their PC-based system for connecting their parallel device. This board can be installed as a fully featured I/O mapped parallel port as 278, 378, and 3BC legacy ISA address under Microsoft Windows and DOS operation systems. Besides, there’re some software (hardware) could not switch operation mode automatically, and user has to require changing LPT settings to the particular mode. SUNIX PAR5008R can force setting SPP, Bi-Directional, EPP, or ECP mode by jumper settings!

With legacy ISA address and Parallel operation mode selectiveness feature, SUNIX PAR5008R simulates onboard native parallel port operation completely. User can connect traditional software protection dongles, JTAG chip programmers, data acquisition, machine process control, scientific measurement systems, and other parallel devices as well as computer's native parallel port. SUNIX PAR5008R Remap card is designed with SUNIX high performance and realizable Parallel connectivity controller, UL7502AQ and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation applications.

Introduction

SUNIX PAR5008R PCI Remap Parallel card enables users to expand one additional real ECP/EPP/SPP/BPP communication LPT port on their PC-based system for connecting their parallel device. This board can be installed as a fully featured I/O mapped parallel port as 278, 378, and 3BC legacy ISA address under Microsoft Windows and DOS operation systems. Besides, there’re some software (hardware) could not switch operation mode automatically, and user has to require changing LPT settings to the particular mode. SUNIX PAR5008R can force setting SPP, Bi-Directional, EPP, or ECP mode by jumper settings!

With legacy ISA address and Parallel operation mode selectiveness feature, SUNIX PAR5008R simulates onboard native parallel port operation completely. User can connect traditional software protection dongles, JTAG chip programmers, data acquisition, machine process control, scientific measurement systems, and other parallel devices as well as computer's native parallel port. SUNIX PAR5008R Remap card is designed with SUNIX high performance and realizable Parallel connectivity controller, UL7502AQ and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation applications.

Features

Easy Hardware Settings for Legacy LPT Configuration

SUNIX PAR5008R can simulate onboard native Parallel port operation mode. This board makes a breakthrough of PCI plug-n-play rule, and it allows user remapping legacy ISA address to the LPT port. User can select 278, 378, or 3BC address and independent ECP/EPP/BPP/ SPP mode by on board hardware jumper settings. It’s the same function as traditional motherboard BIOS setting, but SUNIX board accomplish remap feature by hardware jumper.

Provide Real LPT Port for All Legacy Devices

Unlike USB to parallel adapters, SUNIX Remap Parallel Card function exactly likes a computer's native parallel port and provides a true LPT port in order for your PC to work properly with devices that require a LPT port for setup and configuration. For many legacy devices like parallel scanners, zip drives or other older parallel-port devices, they only work with a real parallel LPT port from a computer and in many cases can not work with virtual parallel ports provided from those USB to parallel port adapter cables to simulate parallel connection.

Support for Any Windows-based PC

SUNIX parallel card supports all Microsoft Windows operation systems, including 32/64-bit Microsoft Windows Server (2008, 2003, 2000) and Widows Client (7, Vista, XP, 98). Furthermore, Remapping function is workable with windows system default driver. It makes your whole system working properly without any potential conflicting issue when connecting legacy parallel devices.

Support All Devices Requiring Hardware DB25-Pin Connection

The DB 25-pin connector of this board is suitable for connection with Printer requiring parallel interface, Scanners, LapLink, Zip Drive, Tape Drive, LS-120 Drive, CD-R/RW, EPROM Programmer, Intelligent UPS, Plotter, Bank Passbook Printer, software protection dongles, JTAG chip programmers, data acquisition, machine process control, scientific measurement systems, etc.


Specifications

Parallel Communication

Interface IEEE1284
BUS Universal PCI 64/32bit 3.3V/5V
PCI Ver 3.0, 2.3, 2.2, 2.1
Controller SUNIX UL7502AQ
IO 378, 278, 3BC or PCI Plug-n-play Assigned by System
No. of Port 1-port
Speed Maximum 1.8MBps
Mode SPP/ECP/EPP/BPP ( Auto-switching or User-Defined)
FIFO 16byte Hardware
PCB Connector DB25 Female
Protection ±2KV ESD protection for each signal Human Body Model (HBM)

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3,
FCC Part 15 Class B, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP/Vista/7/8/8.1 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 120 x 61 mm
Bracket Standard 121 mm
Bracket Space 1

Note:

* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Support

Download Datasheet

Download Driver

Driver SUN1999Driver_V8.2.3.0_(WHQL)
Version Ver 8.2.3.
Update 2017-12-11 17:22:37
Size 9.2MB
OS
Windows 10 RS2 32/64 bit
Driver SUN1999Driver_V8.2.2.0_(WHQL)
Version Ver 8.2.2.0
Update 2017-12-11 17:28:03
Size 9.2MB
OS
Windows 10 RS1 32/64 bit
Driver SUN1999Driver_V8.3.0.0_legacy (WHQL)
Version Ver 8.3.0.0
Update 2017-12-01 15:53:31
Size 9.7MB
OS
Windows 8.1(beta) 32/64 bit
Windows 8.0 32/64 bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32/64 bit
Windows Server 2012R2 64-bit
Windows Server 2012 64Bit
Windows Server 2003 32/64 bit
Windows Server 2008 R2 64bit
Windows Server 2008 32/64 bit
Windows Embedded Standard
Windows Embedded POSReady 2009
Driver SUN1999Driver V7.2.0.0 (WHQL)
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver snx_V2.0.4.3
Version Ver 2.0.4.3
Update 2017-11-22 18:01:14
Size 70.9KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver ParallelPortRegiserAccessTool
Version V1.0
Update 2015-12-30 09:45:45
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8 32/64bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32bit
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS