SER4037D (phased out) (Replacement: SER5037D)
2-port RS-232 Serial PCI Board(DB9 Male )
- Expands 2 independent RS-232 serial ports with communication speeds up to 115.2Kbps.
- High speed SUN1889 16C650 compatible UART controller on-board.
- Compliance with PCI 33MHz Ver 2.2 & 2.1 specification.
- Supports both 64-bit 32-bit PCI bus slot and 3.3V & 5V power.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±2KV ESD protection for all serial signals.
- Plug-n-Play, I/O address and IRQ assigned by BIOS.
- Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
- Support Microsoft Windows, Linux, and DOS.
Introduction
SUNIX SER4037D, Universal PCI serial communication board, allows users to add or expand four RS-232 ports on PC-based system. The card is compatible with both 64 / 32-bit PCI architecture supporting 3.3 and 5V Bus, allowing it to be installed in virtually any PC-based systems. SUNIX SER4037D card has 32-bytes onboard FIFO buffer and compatible with 16C650 UART specification. SUNIX GoldenIO card series is designed with SUNIX UART controller, SUN1889 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.
Specifications
Description |
|
| Product Description | 2 ports RS-232 Serial PCI Board(DB9 Male ) |
Serial Communication |
|
| Interface | RS-232 |
| Controller | SUN1889 (16C650 UART Compatible) |
| Bus Interface | Universal PCI 64/32bit 3.3V/5V PCI Ver 2.2/2.1 |
| No. of Port | 2-port |
| IRQ & IO | Assigned by System |
| FIFO | 32 byte (Hardware) |
| Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
| Baud rate | 50 bps to 115.2 Kbps |
| Data bit | 5,6,7,8 |
| Stop bit | 1,1.5,2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS (Hardware) , XON/XOFF(Software) |
| Protection | ±2KV ESD protection for each signal Human Body Model (HBM) |
| PCB connector | DB9 Male |
Driver Support |
|
| Windows Client | XP/Vista/7/8/8.1 (X86/X64) |
| Windows Server | 2000 / 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 (X86/X64) |
| Windows Embedded |
Windows CE 4.2/5.0/6.0 XP Embedded / POSReady 2009 / POSReady 7 / Embedded System |
| Linux | Linux 2.4.x / 2.6.x / 3.x |
| Unix | SCO Unixware 7.1.3, SCO OpenServer 5.0.6/5.0.7/6.0 |
| DOS | DOS |
| IBM | IBM OS2 WARP 3/4 |
Regulatory Approvals |
|
| Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, RoHS |
| Software | Microsoft WHQL Window XP |
Environment |
|
| Operating Temperature | 0 to 60 °C ( 32 to 140 °F ) |
| Operating Humidity | 5% to 95% RH |
| Storage Temperature | -20 to 85 °C ( -4 to 185 °F ) |
Dimension(Unit = mm) |
|
| PCB Dimension | 128 x 78 |
| Bracket | Standard 121 |
Support
Download Manual
| Manual | 771-SERIAL002-001 |
|
Download Datasheet
| Datasheet | SER4037D-DatasheetV10 |
|
Download Driver
| Driver | SUN1999Driver V8.1.5.0 (WHQL) | |
| Version | sun1999driver v8.1.5.0 (whql) - 20150520 | |
| Update | 2015-06-09 19:00:49 | |
| Size | 4.4MB | |
| OS |
Windows XP 32/64 bit
Windows Embedded Standard
|
| Driver | SUNDOS1.00.00.003.zip | |
| Version | V1.00.00.006 | |
| Update | 2014-08-19 10:36:25 | |
| Size | 21KB | |
| OS |
DOS
|
| Driver | I/O Card Driver_v7.2 | |
| Version | V7.2.0.0 (WHQL) | |
| Update | 2013-12-02 18:00:44 | |
| Size | 4.3MB | |
| OS |
Windows 2000
|
| Driver | WinCE 6.0 Driver V1.2.0.0 | |
| Version | V1.2.0.0 | |
| Update | 2013-09-11 15:40:33 | |
| Size | 301.7KB | |
| OS |
Windows CE 6.0
|
| Driver | WinCE 6.0_Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:52 | |
| Size | 336KB | |
| OS |
Windows CE 6.0
|
| Driver | WinCE 5.0_Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:29 | |
| Size | 280KB | |
| OS |
Windows CE 5.0
|
| Driver | WinCE 4.2_ Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:00 | |
| Size | 236KB | |
| OS |
Windows CE 4.2
|
| Driver | WinNT_Driver0707.zip | |
| Version | Ver.1.0 | |
| Update | 2010-07-07 06:56:21 | |
| Size | 470KB | |
| OS |
Windows NT4.0
|
| Driver | Win9x_Driver0707.zip | |
| Version | Ver.1.0 | |
| Update | 2010-07-07 06:55:49 | |
| Size | 196KB | |
| OS |
Windows 98SE
|
SER4037D (phased out) (Replacement: SER5037D)
2-port RS-232 Serial PCI Board(DB9 Male )
- Expands 2 independent RS-232 serial ports with communication speeds up to 115.2Kbps.
- High speed SUN1889 16C650 compatible UART controller on-board.
- Compliance with PCI 33MHz Ver 2.2 & 2.1 specification.
- Supports both 64-bit 32-bit PCI bus slot and 3.3V & 5V power.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±2KV ESD protection for all serial signals.
- Plug-n-Play, I/O address and IRQ assigned by BIOS.
- Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
- Support Microsoft Windows, Linux, and DOS.
Introduction
SUNIX SER4037D, Universal PCI serial communication board, allows users to add or expand four RS-232 ports on PC-based system. The card is compatible with both 64 / 32-bit PCI architecture supporting 3.3 and 5V Bus, allowing it to be installed in virtually any PC-based systems. SUNIX SER4037D card has 32-bytes onboard FIFO buffer and compatible with 16C650 UART specification. SUNIX GoldenIO card series is designed with SUNIX UART controller, SUN1889 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.
Specifications
Description |
|
| Product Description | 2 ports RS-232 Serial PCI Board(DB9 Male ) |
Serial Communication |
|
| Interface | RS-232 |
| Controller | SUN1889 (16C650 UART Compatible) |
| Bus Interface | Universal PCI 64/32bit 3.3V/5V PCI Ver 2.2/2.1 |
| No. of Port | 2-port |
| IRQ & IO | Assigned by System |
| FIFO | 32 byte (Hardware) |
| Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
| Baud rate | 50 bps to 115.2 Kbps |
| Data bit | 5,6,7,8 |
| Stop bit | 1,1.5,2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS (Hardware) , XON/XOFF(Software) |
| Protection | ±2KV ESD protection for each signal Human Body Model (HBM) |
| PCB connector | DB9 Male |
Driver Support |
|
| Windows Client | XP/Vista/7/8/8.1 (X86/X64) |
| Windows Server | 2000 / 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 (X86/X64) |
| Windows Embedded |
Windows CE 4.2/5.0/6.0 XP Embedded / POSReady 2009 / POSReady 7 / Embedded System |
| Linux | Linux 2.4.x / 2.6.x / 3.x |
| Unix | SCO Unixware 7.1.3, SCO OpenServer 5.0.6/5.0.7/6.0 |
| DOS | DOS |
| IBM | IBM OS2 WARP 3/4 |
Regulatory Approvals |
|
| Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, RoHS |
| Software | Microsoft WHQL Window XP |
Environment |
|
| Operating Temperature | 0 to 60 °C ( 32 to 140 °F ) |
| Operating Humidity | 5% to 95% RH |
| Storage Temperature | -20 to 85 °C ( -4 to 185 °F ) |
Dimension(Unit = mm) |
|
| PCB Dimension | 128 x 78 |
| Bracket | Standard 121 |
Support
Download Manual
| Manual | 771-SERIAL002-001 |
|
Download Datasheet
| Datasheet | SER4037D-DatasheetV10 |
|
Download Driver
| Driver | SUN1999Driver V8.1.5.0 (WHQL) | |
| Version | sun1999driver v8.1.5.0 (whql) - 20150520 | |
| Update | 2015-06-09 19:00:49 | |
| Size | 4.4MB | |
| OS |
Windows XP 32/64 bit
Windows Embedded Standard
|
| Driver | SUNDOS1.00.00.003.zip | |
| Version | V1.00.00.006 | |
| Update | 2014-08-19 10:36:25 | |
| Size | 21KB | |
| OS |
DOS
|
| Driver | I/O Card Driver_v7.2 | |
| Version | V7.2.0.0 (WHQL) | |
| Update | 2013-12-02 18:00:44 | |
| Size | 4.3MB | |
| OS |
Windows 2000
|
| Driver | WinCE 6.0 Driver V1.2.0.0 | |
| Version | V1.2.0.0 | |
| Update | 2013-09-11 15:40:33 | |
| Size | 301.7KB | |
| OS |
Windows CE 6.0
|
| Driver | WinCE 6.0_Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:52 | |
| Size | 336KB | |
| OS |
Windows CE 6.0
|
| Driver | WinCE 5.0_Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:29 | |
| Size | 280KB | |
| OS |
Windows CE 5.0
|
| Driver | WinCE 4.2_ Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:00 | |
| Size | 236KB | |
| OS |
Windows CE 4.2
|
| Driver | WinNT_Driver0707.zip | |
| Version | Ver.1.0 | |
| Update | 2010-07-07 06:56:21 | |
| Size | 470KB | |
| OS |
Windows NT4.0
|
| Driver | Win9x_Driver0707.zip | |
| Version | Ver.1.0 | |
| Update | 2010-07-07 06:55:49 | |
| Size | 196KB | |
| OS |
Windows 98SE
|
SER4037D (phased out) (Replacement: SER5037D)
2-port RS-232 Serial PCI Board(DB9 Male )
- Expands 2 independent RS-232 serial ports with communication speeds up to 115.2Kbps.
- High speed SUN1889 16C650 compatible UART controller on-board.
- Compliance with PCI 33MHz Ver 2.2 & 2.1 specification.
- Supports both 64-bit 32-bit PCI bus slot and 3.3V & 5V power.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±2KV ESD protection for all serial signals.
- Plug-n-Play, I/O address and IRQ assigned by BIOS.
- Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
- Support Microsoft Windows, Linux, and DOS.
Introduction
SUNIX SER4037D, Universal PCI serial communication board, allows users to add or expand four RS-232 ports on PC-based system. The card is compatible with both 64 / 32-bit PCI architecture supporting 3.3 and 5V Bus, allowing it to be installed in virtually any PC-based systems. SUNIX SER4037D card has 32-bytes onboard FIFO buffer and compatible with 16C650 UART specification. SUNIX GoldenIO card series is designed with SUNIX UART controller, SUN1889 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.
Specifications
Description |
|
| Product Description | 2 ports RS-232 Serial PCI Board(DB9 Male ) |
Serial Communication |
|
| Interface | RS-232 |
| Controller | SUN1889 (16C650 UART Compatible) |
| Bus Interface | Universal PCI 64/32bit 3.3V/5V PCI Ver 2.2/2.1 |
| No. of Port | 2-port |
| IRQ & IO | Assigned by System |
| FIFO | 32 byte (Hardware) |
| Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
| Baud rate | 50 bps to 115.2 Kbps |
| Data bit | 5,6,7,8 |
| Stop bit | 1,1.5,2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS (Hardware) , XON/XOFF(Software) |
| Protection | ±2KV ESD protection for each signal Human Body Model (HBM) |
| PCB connector | DB9 Male |
Driver Support |
|
| Windows Client | XP/Vista/7/8/8.1 (X86/X64) |
| Windows Server | 2000 / 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 (X86/X64) |
| Windows Embedded |
Windows CE 4.2/5.0/6.0 XP Embedded / POSReady 2009 / POSReady 7 / Embedded System |
| Linux | Linux 2.4.x / 2.6.x / 3.x |
| Unix | SCO Unixware 7.1.3, SCO OpenServer 5.0.6/5.0.7/6.0 |
| DOS | DOS |
| IBM | IBM OS2 WARP 3/4 |
Regulatory Approvals |
|
| Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, RoHS |
| Software | Microsoft WHQL Window XP |
Environment |
|
| Operating Temperature | 0 to 60 °C ( 32 to 140 °F ) |
| Operating Humidity | 5% to 95% RH |
| Storage Temperature | -20 to 85 °C ( -4 to 185 °F ) |
Dimension(Unit = mm) |
|
| PCB Dimension | 128 x 78 |
| Bracket | Standard 121 |
Support
Download Manual
| Manual | 771-SERIAL002-001 |
|
Download Datasheet
| Datasheet | SER4037D-DatasheetV10 |
|
Download Driver
| Driver | SUN1999Driver V8.1.5.0 (WHQL) | |
| Version | sun1999driver v8.1.5.0 (whql) - 20150520 | |
| Update | 2015-06-09 19:00:49 | |
| Size | 4.4MB | |
| OS |
Windows XP 32/64 bit
Windows Embedded Standard
|
| Driver | SUNDOS1.00.00.003.zip | |
| Version | V1.00.00.006 | |
| Update | 2014-08-19 10:36:25 | |
| Size | 21KB | |
| OS |
DOS
|
| Driver | I/O Card Driver_v7.2 | |
| Version | V7.2.0.0 (WHQL) | |
| Update | 2013-12-02 18:00:44 | |
| Size | 4.3MB | |
| OS |
Windows 2000
|
| Driver | WinCE 6.0 Driver V1.2.0.0 | |
| Version | V1.2.0.0 | |
| Update | 2013-09-11 15:40:33 | |
| Size | 301.7KB | |
| OS |
Windows CE 6.0
|
| Driver | WinCE 6.0_Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:52 | |
| Size | 336KB | |
| OS |
Windows CE 6.0
|
| Driver | WinCE 5.0_Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:29 | |
| Size | 280KB | |
| OS |
Windows CE 5.0
|
| Driver | WinCE 4.2_ Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:00 | |
| Size | 236KB | |
| OS |
Windows CE 4.2
|
| Driver | WinNT_Driver0707.zip | |
| Version | Ver.1.0 | |
| Update | 2010-07-07 06:56:21 | |
| Size | 470KB | |
| OS |
Windows NT4.0
|
| Driver | Win9x_Driver0707.zip | |
| Version | Ver.1.0 | |
| Update | 2010-07-07 06:55:49 | |
| Size | 196KB | |
| OS |
Windows 98SE
|
SER4037D (phased out) (Replacement: SER5037D)
2-port RS-232 Serial PCI Board(DB9 Male )
- Expands 2 independent RS-232 serial ports with communication speeds up to 115.2Kbps.
- High speed SUN1889 16C650 compatible UART controller on-board.
- Compliance with PCI 33MHz Ver 2.2 & 2.1 specification.
- Supports both 64-bit 32-bit PCI bus slot and 3.3V & 5V power.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±2KV ESD protection for all serial signals.
- Plug-n-Play, I/O address and IRQ assigned by BIOS.
- Certified by CE, FCC, RoHS, and Microsoft WQHL approval.
- Support Microsoft Windows, Linux, and DOS.
SUNIX SER4037D, Universal PCI serial communication board, allows users to add or expand four RS-232 ports on PC-based system. The card is compatible with both 64 / 32-bit PCI architecture supporting 3.3 and 5V Bus, allowing it to be installed in virtually any PC-based systems. SUNIX SER4037D card has 32-bytes onboard FIFO buffer and compatible with 16C650 UART specification. SUNIX GoldenIO card series is designed with SUNIX UART controller, SUN1889 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.
Introduction
SUNIX SER4037D, Universal PCI serial communication board, allows users to add or expand four RS-232 ports on PC-based system. The card is compatible with both 64 / 32-bit PCI architecture supporting 3.3 and 5V Bus, allowing it to be installed in virtually any PC-based systems. SUNIX SER4037D card has 32-bytes onboard FIFO buffer and compatible with 16C650 UART specification. SUNIX GoldenIO card series is designed with SUNIX UART controller, SUN1889 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.
Specifications
Description |
|
| Product Description | 2 ports RS-232 Serial PCI Board(DB9 Male ) |
Serial Communication |
|
| Interface | RS-232 |
| Controller | SUN1889 (16C650 UART Compatible) |
| Bus Interface | Universal PCI 64/32bit 3.3V/5V PCI Ver 2.2/2.1 |
| No. of Port | 2-port |
| IRQ & IO | Assigned by System |
| FIFO | 32 byte (Hardware) |
| Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
| Baud rate | 50 bps to 115.2 Kbps |
| Data bit | 5,6,7,8 |
| Stop bit | 1,1.5,2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS (Hardware) , XON/XOFF(Software) |
| Protection | ±2KV ESD protection for each signal Human Body Model (HBM) |
| PCB connector | DB9 Male |
Driver Support |
|
| Windows Client | XP/Vista/7/8/8.1 (X86/X64) |
| Windows Server | 2000 / 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 (X86/X64) |
| Windows Embedded |
Windows CE 4.2/5.0/6.0 XP Embedded / POSReady 2009 / POSReady 7 / Embedded System |
| Linux | Linux 2.4.x / 2.6.x / 3.x |
| Unix | SCO Unixware 7.1.3, SCO OpenServer 5.0.6/5.0.7/6.0 |
| DOS | DOS |
| IBM | IBM OS2 WARP 3/4 |
Regulatory Approvals |
|
| Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, RoHS |
| Software | Microsoft WHQL Window XP |
Environment |
|
| Operating Temperature | 0 to 60 °C ( 32 to 140 °F ) |
| Operating Humidity | 5% to 95% RH |
| Storage Temperature | -20 to 85 °C ( -4 to 185 °F ) |
Dimension(Unit = mm) |
|
| PCB Dimension | 128 x 78 |
| Bracket | Standard 121 |
Support
Download Manual
| Manual | 771-SERIAL002-001 |
|
Download Datasheet
| Datasheet | SER4037D-DatasheetV10 |
|
Download Driver
| Driver | SUN1999Driver V8.1.5.0 (WHQL) | |
| Version | sun1999driver v8.1.5.0 (whql) - 20150520 | |
| Update | 2015-06-09 19:00:49 | |
| Size | 4.4MB | |
| OS |
Windows XP 32/64 bit
Windows Embedded Standard
|
| Driver | SUNDOS1.00.00.003.zip | |
| Version | V1.00.00.006 | |
| Update | 2014-08-19 10:36:25 | |
| Size | 21KB | |
| OS |
DOS
|
| Driver | I/O Card Driver_v7.2 | |
| Version | V7.2.0.0 (WHQL) | |
| Update | 2013-12-02 18:00:44 | |
| Size | 4.3MB | |
| OS |
Windows 2000
|
| Driver | WinCE 6.0 Driver V1.2.0.0 | |
| Version | V1.2.0.0 | |
| Update | 2013-09-11 15:40:33 | |
| Size | 301.7KB | |
| OS |
Windows CE 6.0
|
| Driver | WinCE 6.0_Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:52 | |
| Size | 336KB | |
| OS |
Windows CE 6.0
|
| Driver | WinCE 5.0_Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:29 | |
| Size | 280KB | |
| OS |
Windows CE 5.0
|
| Driver | WinCE 4.2_ Driver_V1.1.0.0.zip | |
| Version | Ver.1.1.0.0 | |
| Update | 2011-06-10 11:50:00 | |
| Size | 236KB | |
| OS |
Windows CE 4.2
|
| Driver | WinNT_Driver0707.zip | |
| Version | Ver.1.0 | |
| Update | 2010-07-07 06:56:21 | |
| Size | 470KB | |
| OS |
Windows NT4.0
|
| Driver | Win9x_Driver0707.zip | |
| Version | Ver.1.0 | |
| Update | 2010-07-07 06:55:49 | |
| Size | 196KB | |
| OS |
Windows 98SE
|