SER6437A

2-port RS-232 PCI Express Board
  • Expands 2 independent RS-232 serial ports with communication speeds up to 115.2Kbps.
  • With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

SUNIX SER6437A, PCI Express serial communication boards meet the PCI Express Base Specification Revision 2.0. It is compatible with PCI Express x1, x2, x4, x8 and x16 lane Bus allowing it to be installed in virtually any PC system. The majorities of today’s motherboards is not equipped with serial ports or only have one serial port. With SUNIX PCI Express serial board, users can add 2 serial ports to their system, allowing them to use serial devices further. SUNIX SER6437A card has 128-bytes onboard FIFO buffer and compatible with 16C950 UART specification. It is designed with SUNIX UART controller, SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.

Specifications

General

Interface RS-232
Controller SUNIX SUN2212 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 2-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 115.2Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS
FreeBSD FreeBSD 5.3~5.5 / 6.0~6.4
QNX QNX 6.3.2/6.4.0

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
Microsoft Client: XP / Vista / 7 / 8.x / 10 (X86/X64)  
Microsoft Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 65 x 88 mm
Bracket Standard 121 mm
Bracket Space 1

Accessories

Optional Accessories

PCIe Add-in card Holder
  • Part No.: 5013-PCIFX1C00-QCN
FILM:PCIe Add-in card Holder Introduction
PCIe Add-in card Holder

Support

Download Datasheet

Download Driver

Driver SUN1999Driver V8.2.2.0_SRV (WHQL)
Version Ver 8.2.2.0
Update 2017-02-24 14:50:55
Size 5.4MB
OS
Windows Server 2016 64bit
Driver SUN1999Driver V8.2.2.0 (WHQL)
Version Ver 8.2.2.0
Update 2017-02-24 14:40:29
Size 5.4MB
OS
Windows 10 32/64 bit
Driver I/O Card driver for linux
Version v2.0.4.2
Update 2016-07-06 17:36:26
Size 274KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver SUN1999Driver V8.2.0.0 (WHQL) with inf - 20151208
Version Ver 8.2.0.0
Update 2016-03-18 09:38:47
Size 4.8MB
OS
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows Server 2012R2 64-bit
Windows Server 2012 64bit
Windows Server 2008 R2 64bit
Windows Embedded POSReady 2009
Driver I/O Card driver
Version V2.0.4.0
Update 2015-06-13 15:15:54
Size 69.5KB
OS
Linux 2.4x/2.6x/3.x
Driver SUN1999Driver V8.1.5.0 (WHQL)
Version sun1999driver v8.1.5.0 (whql) - 20150520
Update 2015-06-09 19:00:49
Size 4.4MB
OS
Windows XP 32/64 bit
Windows Embedded Standard
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS
Driver I/O Card Driver_v7.2
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver WinCE 6.0 Driver V1.2.0.0
Version V1.2.0.0
Update 2013-09-11 15:40:33
Size 301.7KB
OS
Windows CE 6.0
Driver Wince5.0
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2

SER6437A

2-port RS-232 PCI Express Board
  • Expands 2 independent RS-232 serial ports with communication speeds up to 115.2Kbps.
  • With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

SUNIX SER6437A, PCI Express serial communication boards meet the PCI Express Base Specification Revision 2.0. It is compatible with PCI Express x1, x2, x4, x8 and x16 lane Bus allowing it to be installed in virtually any PC system. The majorities of today’s motherboards is not equipped with serial ports or only have one serial port. With SUNIX PCI Express serial board, users can add 2 serial ports to their system, allowing them to use serial devices further. SUNIX SER6437A card has 128-bytes onboard FIFO buffer and compatible with 16C950 UART specification. It is designed with SUNIX UART controller, SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.

Specifications

General

Interface RS-232
Controller SUNIX SUN2212 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 2-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 115.2Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS
FreeBSD FreeBSD 5.3~5.5 / 6.0~6.4
QNX QNX 6.3.2/6.4.0

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
Microsoft Client: XP / Vista / 7 / 8.x / 10 (X86/X64)  
Microsoft Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 65 x 88 mm
Bracket Standard 121 mm
Bracket Space 1

Accessories

Optional Accessories

PCIe Add-in card Holder
  • Part No.: 5013-PCIFX1C00-QCN
FILM:PCIe Add-in card Holder Introduction
PCIe Add-in card Holder

Support

Download Datasheet

Download Driver

Driver SUN1999Driver V8.2.2.0_SRV (WHQL)
Version Ver 8.2.2.0
Update 2017-02-24 14:50:55
Size 5.4MB
OS
Windows Server 2016 64bit
Driver SUN1999Driver V8.2.2.0 (WHQL)
Version Ver 8.2.2.0
Update 2017-02-24 14:40:29
Size 5.4MB
OS
Windows 10 32/64 bit
Driver I/O Card driver for linux
Version v2.0.4.2
Update 2016-07-06 17:36:26
Size 274KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver SUN1999Driver V8.2.0.0 (WHQL) with inf - 20151208
Version Ver 8.2.0.0
Update 2016-03-18 09:38:47
Size 4.8MB
OS
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows Server 2012R2 64-bit
Windows Server 2012 64bit
Windows Server 2008 R2 64bit
Windows Embedded POSReady 2009
Driver I/O Card driver
Version V2.0.4.0
Update 2015-06-13 15:15:54
Size 69.5KB
OS
Linux 2.4x/2.6x/3.x
Driver SUN1999Driver V8.1.5.0 (WHQL)
Version sun1999driver v8.1.5.0 (whql) - 20150520
Update 2015-06-09 19:00:49
Size 4.4MB
OS
Windows XP 32/64 bit
Windows Embedded Standard
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS
Driver I/O Card Driver_v7.2
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver WinCE 6.0 Driver V1.2.0.0
Version V1.2.0.0
Update 2013-09-11 15:40:33
Size 301.7KB
OS
Windows CE 6.0
Driver Wince5.0
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2

SER6437A

2-port RS-232 PCI Express Board
  • Expands 2 independent RS-232 serial ports with communication speeds up to 115.2Kbps.
  • With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

SUNIX SER6437A, PCI Express serial communication boards meet the PCI Express Base Specification Revision 2.0. It is compatible with PCI Express x1, x2, x4, x8 and x16 lane Bus allowing it to be installed in virtually any PC system. The majorities of today’s motherboards is not equipped with serial ports or only have one serial port. With SUNIX PCI Express serial board, users can add 2 serial ports to their system, allowing them to use serial devices further. SUNIX SER6437A card has 128-bytes onboard FIFO buffer and compatible with 16C950 UART specification. It is designed with SUNIX UART controller, SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.

Specifications

General

Interface RS-232
Controller SUNIX SUN2212 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 2-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 115.2Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS
FreeBSD FreeBSD 5.3~5.5 / 6.0~6.4
QNX QNX 6.3.2/6.4.0

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
Microsoft Client: XP / Vista / 7 / 8.x / 10 (X86/X64)  
Microsoft Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 65 x 88 mm
Bracket Standard 121 mm
Bracket Space 1

Accessories

Optional Accessories

PCIe Add-in card Holder
  • Part No.: 5013-PCIFX1C00-QCN
FILM:PCIe Add-in card Holder Introduction
PCIe Add-in card Holder

Support

Download Datasheet

Download Driver

Driver SUN1999Driver V8.2.2.0_SRV (WHQL)
Version Ver 8.2.2.0
Update 2017-02-24 14:50:55
Size 5.4MB
OS
Windows Server 2016 64bit
Driver SUN1999Driver V8.2.2.0 (WHQL)
Version Ver 8.2.2.0
Update 2017-02-24 14:40:29
Size 5.4MB
OS
Windows 10 32/64 bit
Driver I/O Card driver for linux
Version v2.0.4.2
Update 2016-07-06 17:36:26
Size 274KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver SUN1999Driver V8.2.0.0 (WHQL) with inf - 20151208
Version Ver 8.2.0.0
Update 2016-03-18 09:38:47
Size 4.8MB
OS
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows Server 2012R2 64-bit
Windows Server 2012 64bit
Windows Server 2008 R2 64bit
Windows Embedded POSReady 2009
Driver I/O Card driver
Version V2.0.4.0
Update 2015-06-13 15:15:54
Size 69.5KB
OS
Linux 2.4x/2.6x/3.x
Driver SUN1999Driver V8.1.5.0 (WHQL)
Version sun1999driver v8.1.5.0 (whql) - 20150520
Update 2015-06-09 19:00:49
Size 4.4MB
OS
Windows XP 32/64 bit
Windows Embedded Standard
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS
Driver I/O Card Driver_v7.2
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver WinCE 6.0 Driver V1.2.0.0
Version V1.2.0.0
Update 2013-09-11 15:40:33
Size 301.7KB
OS
Windows CE 6.0
Driver Wince5.0
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2

SER6437A

2-port RS-232 PCI Express Board
  • Expands 2 independent RS-232 serial ports with communication speeds up to 115.2Kbps.
  • With high reliable SUNIX SUN2212 native PCI Express 16C950 UART controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

SUNIX SER6437A, PCI Express serial communication boards meet the PCI Express Base Specification Revision 2.0. It is compatible with PCI Express x1, x2, x4, x8 and x16 lane Bus allowing it to be installed in virtually any PC system. The majorities of today’s motherboards is not equipped with serial ports or only have one serial port. With SUNIX PCI Express serial board, users can add 2 serial ports to their system, allowing them to use serial devices further. SUNIX SER6437A card has 128-bytes onboard FIFO buffer and compatible with 16C950 UART specification. It is designed with SUNIX UART controller, SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.

Introduction

SUNIX SER6437A, PCI Express serial communication boards meet the PCI Express Base Specification Revision 2.0. It is compatible with PCI Express x1, x2, x4, x8 and x16 lane Bus allowing it to be installed in virtually any PC system. The majorities of today’s motherboards is not equipped with serial ports or only have one serial port. With SUNIX PCI Express serial board, users can add 2 serial ports to their system, allowing them to use serial devices further. SUNIX SER6437A card has 128-bytes onboard FIFO buffer and compatible with 16C950 UART specification. It is designed with SUNIX UART controller, SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.

Specifications

General

Interface RS-232
Controller SUNIX SUN2212 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 2-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 115.2Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS
FreeBSD FreeBSD 5.3~5.5 / 6.0~6.4
QNX QNX 6.3.2/6.4.0

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
Microsoft Client: XP / Vista / 7 / 8.x / 10 (X86/X64)  
Microsoft Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 65 x 88 mm
Bracket Standard 121 mm
Bracket Space 1

Accessories

Optional Accessories

PCIe Add-in card Holder
  • Part No.: 5013-PCIFX1C00-QCN
FILM:PCIe Add-in card Holder Introduction
PCIe Add-in card Holder

Support

Download Datasheet

Download Driver

Driver SUN1999Driver V8.2.2.0_SRV (WHQL)
Version Ver 8.2.2.0
Update 2017-02-24 14:50:55
Size 5.4MB
OS
Windows Server 2016 64bit
Driver SUN1999Driver V8.2.2.0 (WHQL)
Version Ver 8.2.2.0
Update 2017-02-24 14:40:29
Size 5.4MB
OS
Windows 10 32/64 bit
Driver I/O Card driver for linux
Version v2.0.4.2
Update 2016-07-06 17:36:26
Size 274KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver SUN1999Driver V8.2.0.0 (WHQL) with inf - 20151208
Version Ver 8.2.0.0
Update 2016-03-18 09:38:47
Size 4.8MB
OS
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows Server 2012R2 64-bit
Windows Server 2012 64bit
Windows Server 2008 R2 64bit
Windows Embedded POSReady 2009
Driver I/O Card driver
Version V2.0.4.0
Update 2015-06-13 15:15:54
Size 69.5KB
OS
Linux 2.4x/2.6x/3.x
Driver SUN1999Driver V8.1.5.0 (WHQL)
Version sun1999driver v8.1.5.0 (whql) - 20150520
Update 2015-06-09 19:00:49
Size 4.4MB
OS
Windows XP 32/64 bit
Windows Embedded Standard
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS
Driver I/O Card Driver_v7.2
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver WinCE 6.0 Driver V1.2.0.0
Version V1.2.0.0
Update 2013-09-11 15:40:33
Size 301.7KB
OS
Windows CE 6.0
Driver Wince5.0
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2