|
|
INC Products > Wireless Solutions > Wireless AP |
|
| |
|
| |
Industrial 802.11b/g Wireless LAN Access Point with 2-port RJ45 LAN |
| |
|
| |
|
|
 |
|
| |
 |
| |
| Introduction |
|
To establish a connection at hard-to-wire remote areas or allowing your applications to use mobile equipment, now you have an ideal solution, the WAP-5002/P Wireless Access Point. The Ethernet Redundancy (recovery time < 10 ms) increases the reliability and PoE features eliminates the need of power input requirements. WAP-5002 series operating temperatures ranging from -10 to 55℃ and is rugged enough for any harsh industrial environment. Installation is easy with either DIN-Rail mounting or panel mount. The DIN-rail mounting ability, wide operating temperature range, and IP30 case with LED indicators make WAP-5002 a convenient and reliable solution for your industrial wireless applications.
|
|
|
|
|
| Specifications |
| Description |
| Product Description |
Industrial 802.11b/g Wireless LAN Access Point with 2-port RJ45 LAN |
|
| Wireless |
| Modulation |
802.11b: CCK, DQPSK, DBPSAK
802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM
|
| Radio Frequency |
DSSS |
| Antenna Connector |
Reverse SMA |
| Frequency Band |
America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 GHz (13 channels)
|
| Transmission Rate |
802.11b - 11Mbps/ 201.11g - 54Mbps |
| Transmission Power |
16dBm |
| Receiver Sensitivity |
-81dBm @ 11Mbps, PER< 8%
-64dBm @ 54Mbps, PER<10%
|
| Wireless Security |
SSID Broadcast disable |
| Encryption Security |
WEP 64/128 bit; WPA, WPA2, 802.11i Pre-shared Key(PSK) mode; 802.1X; TKIP |
| Network Mode |
AP, Bridge, Repeater |
|
| |
| |
| LAN |
| 10/100M Ports |
2 x RJ-45 10/100Mbps (Switch Mode) |
| Protection |
1.5KV Magnetic Isolation |
|
| |
| |
| Software |
| Protocols |
ICMP, IP, TCP, UDP, DHCP, BootP, ARP/RARP, DNS, SNMP MIB II, HTTPS, SSL, SSH |
| Configuration |
Web Console, SSH Console, Utility for Windows |
| Status Monitoring |
Associated wireless clients (AP mode), Current DHCP mappings, System event log (local log, remote syslog, SNMP trap), Wireless link status monitor (AP Client mode) |
| Port Security |
MAC based access control, IP filtering, DHCP server disable, static DHCP mapping |
| DHCP |
DHCP Client / DHCP Server |
| Alarm Notification |
Link down/Power down alarm by Relay, Output/SNMP Trap/system Log |
|
| |
| |
| |
| Power |
| Redundancy |
Dual Power Inputs (Terminal Block) |
| Connectors |
6-pin Removable Terminal Block |
| Protection |
Reverse |
| Consumption |
6 Watts maximum |
| Input |
12~48 VDC (12VDC) |
| Alarm Contact |
1 x Configurable Relay Output |
|
| Certifications |
| EMI |
FCC Part 15, CISPR (EN55022) Class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge) Level 3, EN61000-4-6 (CS) Level 3 |
|
| Mechanical |
| Dimensions |
52 x 106 x 144 mm (W x D x H)(without connectors) |
| Enclosure |
Metal (IP30 protection) |
| Mounting |
DIN Rail and Wall Mount |
|
| Environment |
| Operating Temperature |
-10 ℃~ 55 ℃ |
| Operating Humidity |
5 ~ 95% RH |
| Storage Temperature |
-20 ℃~ 85 ℃ |
|
|
| Warranty |
|
|
|
|
|
|
|
|
|
;){kind=small}
High speed air connectivity: WLAN interfaces support up to 54Mbps link speed